Barix R6

Barix R6

1.480,00 DKK


The Barix R6 is a universal, low cost, small form factor I/O extension device which connects to a host via Modbus/RTU. The six 250V/16A rated relays are controlled using Modbus/RTU commands via the serial interface Special power savings features keep the active power of the device low even if all relays are activated.

Designed in Switzerland and installed in thousands of locations internationally, the Barix control products have poven themselves as a very reliable, versatile product solving interfacing, data collection and control problems effectively, world wide.


Model/Varenr.: 180030

APPLICATIONS
•Voice Evacuation Systems with 6 Relays

FEATURES
• Relay Output (6)
• RS-485 Serial Port (1)
• Supply Voltage (9-30V)

TECHNICAL SPECIFICATIONS

RELAYS
• 6 relays (250 VAC 10 A, 16 Amax <1sec) on screw block with common, NO (normally
open) and NC (normally closed) contacts
• for wires AWG 26 – AWG 14 / 0.15 – 2.5 mm²

RS-485 / POWER / EXPANSION
• Power/RS-485 on detachable screw block for wires AWG 28 – AWG 16 / 0.08 – 1.3 mm²
• 2 extension connectors (3”/75 mm cable incl.)

RS-485 / PROTOCOL
• RS-485 (2-wire), 9’600/19’200 Baud, 8 bit, Even/No parity software configurable,
• Modbus/RTU protoco

MISC
• 1 LED for power indication
• 1 LED for RS-485 active send indication
• 6 LED for relay status indication
• Internal connector for default settings jumper

POWER SUPPLY REQUIREMENTS
• 12 to 24 VAC / 9 to 30 VDC
• 3.5 Watt max. (all relays active)

CASE
• high quality plastic, 220 grams, DIN-rail mount.
• 4.13“ x 3.34“ x 2.83“/105 mm x 85 mm x 32 mm

MTBF
• Min. 237 000h acc. to MIL217F at 25°C ambient temperature

CERTIFICATIONS
FCC (A and B), CE ( A and B)

IMMUNITY
EN60730-1.2000

EMISSIONS
EN60730-1:2000 (Class B)

 

Titel Type Størrelse Download
Product_sheet_Barix_R6_30.pdf PDF 220.40KB Download