Dankort EuroCard / MasterCard JCB Visa
Vælg kategori: Søg produkt:
 
Indkøbskurven er tom!  
 

Dansk English

Produktoversigt:
Audio forlænger
Audio/Video produkter
Connectivity
Converters - VGA - ADC - DVI - HDMI - SDI
DVI / VGA forlænger UTP
Hjemmebiograf / Home Theater
Industri monitorer/kameraer
Industrial Automation
Kabler
KVM forlænger
KVM switche
Lærer-Elev system - Computer undervisning
Netværk produkter
Power over IP
Strømforsyninger
USB produkter
VGA / DVI Splitters
Leverandører
ADDER
BARIX
BRIGHTSIGN
Broadrack
DAXTEN
GEFEN
Icron
Lanner
LENGKENG
MuxLab
NetModule
Protech Systems
PTN ELECTRONICS
RARITAN
Reliable Photonics
SC&T
SEH
Sierra Wireless
SINTRONES
Sparklan
TELTONIKA
TVONE
Wentronic
BEACON
ADVANTECH
DIGI INTERNATIONAL
LANTRONIX
MULTI TECH SYSTEMS
OPENGEAR
PERLE SYSTEMS
SPHINX COMPUTER
SUNIX
VXL INSTRUMENTS

Værktøj & Tilbehør

Enestående undervisnings system! Hardware baseret
Nyheder fra RARITAN!
GameSwitch til Playstation III
DVI eller VGA over netværk!

Avanceret søgning
Indkøbskurv
Forside

Info:
Salgsbetingelser
FAQ
Betaling
Forsendelse
Garanti
Ordrestatus

Links:
S-Connect
Daxten
Gefen
BrightSign

Alle priser
er excl. moms




Splitter > Leverandører > GEFEN > Splitter
Side 1 af 2

Sorterer efter ProduktnavnPrisVare nr.Sidst redigeret


1.  1:10 HDMI 1.3 Distribution Amplifier - Silver
1:10 HDMI 1.3 Distribution Amplifier
[ Læg i kurv ]
Pris: DKK 5.930,00 (EUR 797,04)
  
2.  1:2 Component Audio over CAT5
The 1:2 Component Audio over CAT5 extends and duplicates your audio and component video signals at distances of up to 1000 feet away. Remote AV signals are received from the 1:2 Component Audio over CAT5 Sender unit, via industry-standard CAT5 network cables. The 1:2 Component Audio over CAT5 will extend Analog Component as well as Analog Audio or Digital Audio via S/PDIF or TOSlink and provide two full sets of AV signal output on the receiving end. Audio is transmitted digitally over the CAT-5 cable and both the analog and digital audio outputs are active on the receiver side.
[ Læg i kurv ]
Pris: DKK 3.754,00 (EUR 504,57)
  
3.  1:2 DVI Distribution Amplifier
The new and improved Dual Link 1:2 DVI Distribution Amplifier splits video from a dual link DVI source, such as a computer, to two DVI dual link outputs, such as monitors, without losing picture quality or the high resolution. Multiple 1:2 DVI DL units can be cascaded from one to the next to create a flexible Dual Link DVI distribution system that can connect to multiple displays. Note: HDCP and EDID Pass-through is only supported on Output #1
[ Læg i kurv ]
Pris: DKK 2.595,00 (EUR 348,79)
  
4.  1:2 Splitter for HDMI 1.3 with Digital Audio
Split HDMI 1.3 to 2 HDTV Displays -- with additional optical digital audio output... The 1:2 Splitter for HDMI 1.3 with Digital Audio allows set-top boxes, DVD players, DVRs and even computers to be connected to two HDTV displays simultaneously. A TOSLINK output on the rear of the Splitter feeds digital audio to an external amplifier or receiver for additional installation flexibility. A greater number of HDTV displays can be daisy-chained together to create a larger distribution. ...
[ Læg i kurv ]
Pris: DKK 2.174,00 (EUR 292,20)
  
5.  1:4 3G-SDI Splitter
One SDI Input Becomes 4 3G-capable SDI Outputs for Real-Time Multi-Viewing
[ Læg i kurv ]
Pris: DKK 4.499,00 (EUR 604,70)
  
6.  1:4 Component Audio CAT5 Distribution Amplifier
Extend up to 4 sets of Component A/V -- up to 1000 feet! The 1:4 Component/Audio over CAT5 Distribution Amplifier sends up to 4 identical sets of sparkling clear component video and associated audio up to 1080p at remote locations via four CAT5 cables -- at distances of up to 1000 feet. Now you can reliably and cleanly distribute up to four copies of a video signal and accompanying digital or analog audio to remote locations without having to worry about signal drop-off and loss of quality.
[ Læg i kurv ]
Pris: DKK 6.004,00 (EUR 806,99)
  
7.  1:4 DVI Distribution Amplifier/Splitter
One DVI input, Four DVI outputs DVI (Digital Visual Interface) is a common connector used throughout the industry to connect digital video displays to video sources such as computers.
[ Læg i kurv ]
Pris: DKK 3.755,00 (EUR 504,70)
  
8.  1:4 DVI Dual Link Splitter
The 1:4 DVI Dual Link Splitter distributes a dual link DVI source to four DVI dual link outputs, without losing quality or resolution. It works with any dual link DVI computer supporting resolutions up to 2560 x 1600. The DVI DL Splitter supports internal or pass-through EDID selections, output masking on/off, and can be placed in standby mode, which keeps the unit idle using only 1W of power when the source is inactive. Using the RS-232 port allows making mode changes for the EDID and output masking in addition to firmware upgrade.
[ Læg i kurv ]
Pris: DKK 6.756,00 (EUR 908,06)
  
9.  1:4 HDMI 1.3 Splitter (Pre-Order)
1x HDMI input, 4x HDMI outputs
[ Læg i kurv ]
Pris: DKK 3.002,00 (EUR 403,49)
  
10.  1:4 Splitter for DisplayPort (Pre-Oder)
The Gefen 1:4 Splitter for DisplayPort allows a DisplayPort-equipped source to be connected to four DisplayPort displays. EDID management provides rapid integration of source and displays. Two or more of these splitters can be connected together to create larger video distribution networks.
[ Læg i kurv ]
Pris: DKK 3.754,00 (EUR 504,57)
  
11.  1:5 HDMI 1.3 Splitter
1:5 HDMI 1.3 Splitter
[ Læg i kurv ]
Pris: DKK 3.754,00 (EUR 504,57)
  
12.  1x2 DVI DL Splitter
The DVI DL Splitter allows computers with a Dual Link DVI output to be connected to two or more Dual Link DVI displays at the same time. It is a flexible distribution hub that can accommodate multiple displays when two or more DVI DL Splitters are connected together to create a greater distribution
[ Læg i kurv ]
Pris: DKK 2.622,00 (EUR 352,42)
  
13.  1x3 Component Audio DA
1:3 Component Audio Distribution Amplifier One Component and Audio Input, 3 Component and Audio Outputs The 1:3 Component Audio Distribution Amplifier is the perfect solution for anyone who needs to send one source of high definition component video and analog or digital audio to multiple displays at the same time. It supports all component equipment, such as DVD players and satellite set top boxes and all component displays. In operation, the component video source is connected to the distribution amplifier at the input. Three outputs are available to be used in part or in full. Once the unit is connected and powered, your source is routed to up to three component high definition displays at the same time.
[ Læg i kurv ]
Pris: DKK 1.498,00 (EUR 201,34)
  
14.  1x4 VGA Hub
One VGA Input, Four VGA Outputs - The ex•tend•it 1:4 VGA Hub allows a computer with a VGA graphic card to connect to up to four VGA compatible monitors or projectors at the same time. Because it allows one computer to drive multiple monitors for simultaneous viewing, you can use it to set up additional monitors in the workspace, or to assist presentation environments by sending graphics to both monitors and projectors at the same time
[ Læg i kurv ]
Pris: DKK 1.497,00 (EUR 201,21)
  
15.  1x8 DVI Distribution Amplifier
1x DVI input, 8x DVI outputs
[ Læg i kurv ]
Pris: DKK 6.756,00 (EUR 908,06)
  

 
Næste Side »
 
KVM GRUPPEN ApS  -  Voldbjergvej 12A, st.  -  8240 Risskov
Tlf. 8699 7996 / 4029 7970  -  Fax. 8699 7997  -  E-mail: info@kvmshop.dk  -  SE nummer: 30825020